Panasonic CQ-4300U - Manual (Page 17)

BASS/FAD
BAL/FADER
17
Temperature Reading
(Only for CQ-4500U)
To read the temperatare outside the vehicle, press and hold the
knob [SEL] for more than 2 seconds. The current temperature in
Fahrenheit is displayed on the display.
Press and release the knob [SEL] to shift the temperature display
to the current operating mode.
Press and hold the knob [SEL] for more then 2 seconds again to
cancel the temperature reading mode.
The display will show "TAPE
CLN
" to warn you to clean the
cassette head for maintaining its top condition after accumulated
100 hours tape playing.
Press and hold [ ̇̈ ] for more than 2 seconds to clear the "TAPE
CLN " display and the TAPE mode display will be resumed. (It is
valid only in TAPE mode.)
Notes:
The temperature Sensor Lead must be connected (option).
If you switch the temperature reading mode to the other mode
(EX. Tape mode
CD changer mode), the display will show that
mode for 5 seconds and then resume the temperature reading.
Cassette Head Cleaning Warning
Press and hold
BASS/FAD
BAL/FADER
Press and release
Press and hold