Pioneer VSX-819H-S User Manual
Page 3
BA
ND
PHONES
INPU
T
SELEC
TOR
STA
NDBY/ON
AU
TO S
UR
RO
UN
D/
ST
RE
AM DIRE
CT
STEREO/
A.L
.C.
ADV
AN
CED
SU
RR
OUND
STAND
AR
D
SUR
ROUND
MASTER
VOL
UME
SPEAKE
RS
CO
NTROL
MU
LTI
-ZON
E
ON/O
FF
TUNE
R E
DIT
ENTER
AUDI
O/ VIDEO MULTI
- CHANNEL
RECEIVER
TUNE
–
TUNE
+
PRESET
–
PRESE
T +
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
radiation (at least 60 cm at top, 10 cm at rear, and
30 cm at each side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the
product, and to protect it from overheating. To
prevent fire hazard, the openings should never be
blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the
equipment on thick carpet or a bed.
D3-4-2-1-7b_A_En
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
on vacation).
D3-4-2-2-1a_A_En
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from
the AC outlet to shut down all power. Therefore,
make sure the unit has been installed so that the
power cord can be easily unplugged from the AC
outlet in case of an accident. To avoid fire hazard,
the power cord should also be unplugged from the
AC outlet when left unused for a long period of time
(for example, when on vacation).
D3-4-2-2-2a_A_En
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, Surround EX
and the double-D symbol are trademarks of
Dolby Laboratories.
D3-4-2-1-5_En
Voltage selector
You can find the voltage selector switch on the rear
panel of multi-voltage models.
The factory setting for the voltage selector is
220-240 V. Please set it to the correct voltage for
your country or region.
• Saudi Arabia operates on 127 V and 220 V mains
voltage. Please set to the correct voltage before using.
• For Taiwan, please set to 110-127 V before using.
• For Mexico, please set to 110-127 V before using.
Before changing the voltage, disconnect the AC power
cord. Use a medium size screwdriver to change the
voltage selector switch.
For Taiwan exclusively
Taiwanese two pin flat-bladed plug
Medium size
screwdriver
Manufactured under license under U.S.
Patent #’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 & other U.S.
and worldwide patents issued & pending.
DTS is a registered trademark and the DTS
logos, Symbol, DTS-HD and DTS-HD Master
Audio are trademarks of DTS, Inc. ©
1996-2007 DTS, Inc. All Rights Reserved.
A warning that excessive sound pressure
from earphones and headphones can cause
hearing loss.
These symbols are only valid
in the European Union.
K058c_A1_En
(Symbol examples for batteries)
Pb
cover_anki_819H.fm 3 ページ ２００９年２月９日 月曜日 午後５時３７分