Pentax 67II User Manual

Page 48

Text mode
Original mode

ADVANCED OPERATION

Depress the shutter release
button. The film counter
indicators in the viewfinder and
on the LCD panel stop blinking.

➥➥
● To expose the third shot, set the multi-exposure lever in the lock position in the

same manner as step 1 after taking the second shot.

● When using the Multi-Exposure Mode, you usually get the best results using a flash

to illuminate the main subject against a dimly-lit background.

● Once the Multi-Exposure Mode is set, it cannot be canceled normally. If you want to

cancel it, cover the lens with the cap, set the shutter speed to 1/1000 of a second,
set the aperture to the minimum value, and depress the shutter release button in a
dark place.

● When making the multi-exposures on the last frame of the film, E appears on the

LCD panel after the first-exposure is made and then [10] or [21] appears when the
shutter is cocked for second exposure while holding down the multi-exposure lever.