Paxar Monarch 6015 - Manual (Page 9)

6
C r e a t i n g B a r C o d e F i e l d s
The printer can print the following bar codes, with or without human-
readable data.
♦
Code 39
♦
Codabar
♦ Interleaved 2 of 5
♦
Code 128 (UCC/EAN-128)
♦ UPC/EAN/JAN
Command Description
ESC-'z'--
--
Prints a bar code without human-readable
data.
ESC-'Z'--
--
Prints a bar code with human-readable data.
The type of bar code to print (values are the
ASCII representation, not hex).
'1' Code 39
'2' Code 128 (UCC/EAN-128)
'3' Interleaved 2 of 5
'4' UPC/EAN/JAN
'5' Codabar
The length of the bar code data (in hex). This
value is dependent on the bar code you
choose with (see below).
The height of the bar code (in hex) in
increments of .125 mm. can be no
smaller than 14. For example, 14 = 2.5 mm,
15 = 2.625 mm, etc.
For UPC/EAN/JAN bar codes, the height you
specify will include a 1.25 mm drop bar
pattern after the bar code.
The data for the bar code. Its length must
equal . See the following table for
data restrictions, which vary by bar code.