Pioneer SUPER TUNERIII DEH-P8650MP - Manual (Page 26)

2 Press MULTI-CONTROL to select the
search method.
Press MULTI-CONTROL until the desired
search method appears in the display.
! FF/REV Fast forward and reverse
! ROUGH Searching every 10 tracks
Searchingevery 10 tracks in
the current folder
Ifthe current folder contains over 10 tracks,
you can search every 10 tracks. When one
folder contains a lot of tracks, you can roughly
search for the track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on the
previous page.
2 Push and hold MULTI-CONTROL left or
right to search every 10 tracks in the cur-
rent folder.
# Ifthe current folder contains less than 10
tracks, pushing and holding MULTI-CONTROL
right recalls the last track ofthe folder. Also, ifthe
remaining number oftracks after searching every
10 tracks is less than 10, pushing and holding
MULTI-CONTROL right recalls the last track of
the folder.
# Ifthe current folder contains less than 10
tracks, pushing and holding MULTI-CONTROL
left recalls the first track of the folder. Also, if the
remaining number oftracks after searching every
10 tracks is less than 10, pushing and holding
MULTI-CONTROL left recalls the first track of the
folder.
Switchingthe tagdisplay
It is possible to turn the tag display on or off, if
MP3/WMA disc contains text information
such as track title and artist name.
! Ifyou turn the tag display off, time to play-
back will be shorter than when this func-
tion is turned on.
1 Use MULTI-CONTROL to select
TAG READ.
The function name tag TAG READ is high-
lighted.
2 Press MULTI-CONTROL to turn tag dis-
play on.
Tag read mode :ON appears in the display.
# To turn tag display off, press
MULTI-CONTROL again.
Note
When you turn the tag display on, the unit returns
to the beginning ofthe current track in order to
read the text information.
Usingcompression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality ofthe CD player. Each ofthe functions
have a two-step adjustment. The COMP func-
tion balances the output oflouder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback ofthe track or CD that
you are listening to.
1 Use MULTI-CONTROL to select
COMP/BMX.
The function name tag COMP/BMX is high-
lighted.
MP3/WMA/WAV Player
En
26
Section
06