Panasonic SA-XR700 - Manual (Page 25)

25
RQT8743
Enjoying the Home Theater
ENGLISH
SPEAKERS B
• Playback is in 2-channel stereo when you select “SPEAKERS
B” only.
• When only “SPEAKERS B” is selected and the input source is
surround, “ 2CH MIX” appears on the display.
• Selected speakers output sounds assigned to front 2 channels
when you make DVD ANALOG 6CH connections.
• If you select “SPEAKERS B” only, the following are set
automatically irrespective of settings selected in “Setting
speakers and their sizes” (á page 33).
Speaker size: “
LARGE ”
Subwoofer: “ NO ” (Bass is output from the front speakers.)
• Settings made through the auto speaker setup (á pages 22
and 23) are cancelled.
ADVANCED DUAL AMP (á page 37)
• The unit takes advantage of unused amps, and runs one
speaker with 2 amps when this function is on. ADVANCED
DUAL AMP offers you sounds that are clearer and higher in
audio quality than those available in normal playback. In 2-
channel stereo playback, 3 speaker amps drive front
speakers. The operation is called the triple amp mode.
2-channel stereo playback: Front, surround and surround back
speaker amps are used for driving front speakers (triple amp
mode).
5.1-channel playback: Front and surround back speaker amps
are used for driving front speakers (dual amp mode).
BI-AMP (á page 37)
• The unit takes advantage of the front speaker and the
surround speaker amps, and drives the speakers’ high-
frequency and low-frequency ranges separately when this
function is on.
• ADVANCED DUAL AMP is available with BI-AMP. When
combined, the two functions enhance clarity and audio quality
of stereo sounds.
• When you make bi-wire setting (á page 20), both BI-AMP and
ADVANCED DUAL AMP take effect as long as overlap is
possible. In such case, ADVANCED DUAL AMP activates in
the dual amp mode.
Select “
OFF ” in “Cancelling BI-AMP (using the triple amp
mode)” (á page 34) when you wish to use the triple amp
mode.
• You cannot use BI-AMP with analogue 6-channel connections
for DVD-Audio sources.
Playing DVD-Audio
Make the following speaker settings on the DVD recorder or the
DVD player. (They are normal factory settings for the DVD
recorder and the DVD player.)
• Speaker size: “
LARGE ” for all speakers
• Speaker presence: present for all speakers
• Distance setting: 0 or an equal distance for all speakers
Using
SPEAKERS B
Sound is output from the speakers connected to the FRONT B terminals on this unit.
Press to switch “ ” on.
To turn off speakers connected
to the FRONT A terminals
Switch “
” on the display off by
pressing [SPEAKERS A].
ADVANCED
DUAL AMP
ADVANCED DUAL AMP activates automatically when you use 2-channel stereo playback or 5.1-channel
playback.
The “ADVANCED DUAL AMP” indicator stays on while this function
is on. • You can also set the ADVANCED
DUAL AMP off (á page 34).
BI-AMP
This function activates automatically when you play analogue audio sources or 2-channel PCM signals
through bi-wire connections.
• Connect bi-wire speakers ( á page 20).
• Select “ YES ” in “Making bi-wire setting” ( á page 20).
• Press [SURROUND] off ( á pages 12 and 24).
• The “BI-AMP” indicator stays on while
BI-AMP is at work.
• Refer to “Making BI-AMP settings”
(á page 34) for detailed settings.
Playing
DVD-Audio
Enjoying DVD-
Audio sources
through digital
connections
Connect the unit to a DVD recorder or DVD player using the HDMI cable ( á page 7) or a
digital cable (COAXIAL1) ( á pages 14 and 15).
Playing DVD
ANALOG 6CH
• Make analogue 6-channel connections
( á page 18).
• Select “SPEAKERS A” or turn bi-wire
speakers on (á page 24).
• Switch the input source to “ BD/DVD ”
( á page 24).
Press and hold until
“DVD 6CH ” is displayed.
When the unit is connected to a
DVD recorder
Playback is unavailable while the
input source is “ DVR ”. Make
analogue 6-channel connections
and switch the mode to “ BD/DVD ”.
• To cancel, press and hold until
“ BD/DVD ” is displayed.
Enjoying high
quality 2-channel
analogue sounds
You can enjoy high quality stereo sound with 192 kHz 2-channel DVD-Audio.
1 Cancel the “DVD 6CH ” setting. (above)
2 Set the input signal to “ANALOG ” in “Setting input signals”. (
á page 35)
B
SPEAKERS
B
B
SPEAKERS
A
BD/DVD
PLAYER
ANALOG 6CH
Note
SA_XR700_EG_GN_ (RQT8743_B)ver.3.fm 25 ページ ２００６年８月３１日 木曜日 午前９時７分