Performance, Electrical power, Interface – Pharos Science & Applications iGPS-BT II User Manual
Page 14: Physical, Environmental

IV.
iGPS-BT II GPS Receiver Specifications
Performance
Chipset
SiRF StarIII GSC3f
Antenna Integrated
patch
antenna
Frequency
L1, 1575.42 MHz
Sensitivity -159
dBm
Channels
12 Channel all-in-view tracking
Acquisition time
Cold Start: 35 sec (open sky)
Hot Start: 1 sec (open sky)
Reacquisition 0.1
sec
Position update
1 Hz
Accuracy
Position: Autonomous < 10 meters, SBAS < 5m
Velocity: 0.1 meter/second
Time: 1 microsecond synchronized to GPS time
Datum:
WGS-84
Electrical Power
Battery
1100mAh Li-Ion rechargeable/replaceable battery
Battery charger
Car charger included, AC charger optional
Constant-current charging circuit incorporated in the
BT-Dock
Operation time
>11 hours continuous use with full charge
>15 hours in trickle power mode
Interface
Connection
Communicate with Host Platform via
Bluetooth(Class2) Serial Profile
Protocol NMEA-0183
(V3.1) standard
Data rate
4800 bps
NMEA message
GGA, GSA, GSV, and RMC
WAAS/EGNOS Enabled
Trickle power
Programmable
Bluetooth spec
Frequency band: 2400-2483.5 MHz
Data rate: up to 721 Kbps
Security: data encryption up to 128-bits
Typical range: up to 32 feet (10 meters)
Physical
Dimension
72 mm x 47 mm x 21 mm
Weight 60
grams
Environmental
Operation temperature
-20
°C to 60°C (-4°F to 140°F)
Dynamics
Altitude < 20 km
Velocity < 900 km/h
Acceleration < 3g
Specifications are subject to change without prior notice.
13