beautypg.com

Planar PL1500 User Manual

Page 6

background image

4

PRECAUTIONS

z

Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen

sink, laundry tub, swimming pool or in a wet basement.

z

Do not place the monitor on an unstable cart, stand, or table. If the monitor

falls, it can injure a person and cause serious damage to the appliance.

Use only a cart or stand recommended by the manufacturer or sold with

the monitor. If you mount the monitor on a wall or shelf, use a mounting kit

approved by the manufacturer and follow the kit instructions.

z

Slots and openings in the back and bottom of the cabinet are provided for

ventilation. To ensure reliable operation of the monitor and to protect it

from overheating, be sure these openings are not blocked or covered. Do

not place the monitor on a bed, sofa, rug, or similar surface. Do not place

the monitor near or over a radiator or heat register. Do not place the

monitor in a bookcase or cabinet unless proper ventilation is provided.

z

The monitor should be operated only from the type of power source

indicated on the label. If you are not sure of the type of power supplied to

your home, consult your dealer or local power company.

z

Unplug the unit during a lightening storm or when it will not be used for

long period of time. This will protect the monitor from damage due to

power surges.

z

Do not overload power strips and extension cords. Overloading can result

in fire or electric shock.

z

Never push any object into the slot on the monitor cabinet. It could short

circuit parts causing a fire or electric shock. Never spill liquids on the

monitor.

z

Do not attempt to service the monitor by yourself; opening or removing

covers can expose you to dangerous voltages and other hazards. Please

refer all servicing to qualified service personnel.

z

To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate configured receptacles marked

between 100 - 240V AC, Min. 3.5A.

z

The wall socket shall be installed near the equipment and shall be easily

accessible.