Planar TOUCH SCREEN LCD MONITORS PT1700MX - Manual (Page 25)

23
4. Install Windows
®
VISTA driver and follow the step-by-step instructions to
get the full touchscreen features.
* A special calibration tool can be installed for improved touch position
accuracy. See “Optional Capacitive Calibration Tool Install” section for more
information.
If you are using a PC running Windows
®
,XP Embedded, follow the instructions
below:
Express:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable
the EWF by using the EWF Manager command or the EWF API; for
example: ewfmgr c:-disable
4. Once the EWF is disabled click on the XP driver on the CD and follow the
step-by-step instructions as shown on the pop-up windows.
Custom:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the zipped file on the CD.
If you are using a PC running Windows
®
,CE, follow the instructions below:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Using Platform Builder, build an image file by following the step-by-step
instructions found in the zipped file on the CD.