Planar PDP 42 - Manual (Page 42)

4 2
Panel Protection
PBP Mode
Panel Protection (How to set the panel protection function)
It is recommended that the panel protection mode be used on a paused/ frozen screen or on a screen
on which a company's logo remains for a long period.
There is a possibility that screen flickers during changing panel protection mode. But, it is not a defect.
1. Press to move to .
2. Press to get into the sub menu.
3. Select the required panel protection mode with .
Press after making adjustments to return to the previous menu.
Press it again to leave the menu.
Scroll : This is a function that scrolls a screen at 10 second intervals.
Bright Down : This is a function that lowers brightness of the screen for panel protection.
All : Scroll and Bright Down mode are simultaneously operated.
Off : Panel Protection mode is not operated.
Press .
CAUTION - This function does not fully prevent the image sticking that occurs when the fixed
screen continues for long, due to the feature of the panel.(Please refer to page 5)