Pioneer SRC7127-B/N - Manual (Page 32)

Introduction of advanced
operations
% Press FUNCTION to select BSSM.
# To return to the channel display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the channel display.
Storing and recalling broadcast
stations
If you press any of the preset tuning buttons 1
to 6, you can easily store up to six broadcast
stations for later recall with the touch of a but-
ton.
% When you find a station that you want
to store in memory, press one of preset
tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.
Notes
! Up to 12 stations, six for each of two TV bands
can be stored in memory.
! You can use a and b to recall stations as-
signed to preset tuning numbers P.CH01 to
12.
Storing the strongest broadcast
stations sequentially
1 Press FUNCTION to select BSSM.
2 Press a to turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished,
BSSM stops flashing.
# To cancel the storage process, press b.
# To return to the channel display, press BAND.
Notes
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the channel display.
! Storing broadcast stations with BSSM may re-
place broadcast stations you have saved
using
1 to 6.
Available accessories
En
32
Section
03