Pioneer KEH-P4020R - Manual (Page 23)

Additional Information
En 22
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Specifications
General
Power source ...................... 14.4 V DC (10.8 – 15.1 V
allowable)
Grounding system .............. Negative type
Max. current consumption
............................................. 10.0 A
Dimensions (W × H × D):
Chassis ........................ 178 Ч 50 Ч 157 mm
Nose ............................ 188 Ч 58 Ч 20 mm
Weight ................................. 1.4 kg
Audio
Maximum power output ..... 50 W × 4
Continuous power output .. 25 W × 4 (DIN 45324,
+B=14.4 V)
Load impedance ................. 4 Ω (4 – 8 Ω allowable)
Preout max output level/output impedance
............................................. 2.2 V/1 kΩ
Equalizer (3-Band Equalizer):
(LOW) .......................... Level : ±12 dB
(MID) ........................... Level : ±12 dB
(HIGH) ......................... Level : ±12 dB
Loudness contour
(LOW) .......................... +3.5 dB (100 Hz),
+3 dB (10 kHz)
(MID) ........................... +10 dB (100 Hz),
+6.5 dB (10 kHz)
(HIGH) ......................... +11 dB (100 Hz),
+11 dB (10 kHz)
(volume : –30 dB)
Cassette player
Tape ..................................... Compact cassette tape
(C-30 – C-90)
Tape speed .......................... 4.8 cm/sec
Fast forward/rewinding time
............................................. Approx. 100 sec (C-60)
Wow & flutter ...................... 0.09% (WRMS)
Frequency response ........... 30 – 16,000 Hz (±3 dB)
Stereo separation ............... 45 dB
Signal-to-noise ratio ........... 61 dB (IEC-A network)
FM tuner
Frequency range ................. 87.5 – 108 MHz
Usable sensitivity ............... 9 dBf (0.8 µV/75 Ω, mono,
S/N: 30 dB)
50 dB quieting sensitivity ... 15 dBf (1.5 µV/75 Ω, mono)
Signal-to-noise ratio ........... 70 dB (IEC-A network)
Distortion ............................ 0.3% (at 65 dBf, 1 kHz,
stereo)
Frequency response ........... 30 – 15,000 Hz (±3 dB)
Stereo separation ............... 40 dB (at 65 dBf, 1 kHz)
MW tuner
Frequency range ................. 531 – 1,602 kHz (9 kHz)
Usable sensitivity ............... 18 µV (S/N: 20 dB)
Selectivity ............................ 50 dB (±9 kHz)
LW tuner
Frequency range ................. 153 – 281 kHz
Usable sensitivity ............... 30 µV (S/N: 20 dB)
Selectivity ............................ 50 dB (±9 kHz)
Note
• Specifications and the design are subject to
possible modifications without notice due to
improvements.