Pioneer PDP-4270XD - Manual (Page 36)

Enjoying DTV broadcasts 09
36
En
• To quit a channel search in progress, press HOME MENU.
Note
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 47.
• You can select "DTV Setup" only when watching DTV channels.
Checking signal strength
You can check the signal strength and signal quality of each TV
channel.
1 Repeat steps 1 to 4 provided for “Adding New Channels“.
2 Select “Signal Check“ ( / then ENTER).
3 Select “RF Channel“ ( / then ENTER).
4 Select the channel to be checked ( /).
Use "Add New Channels" function here to add channels within the
selected RF channel (receiving frequency).
Note
• You can select "DTV Setup" only when watching DTV channels.
Switching the aerial power on / off
Use the following procedure to switch on or off the power to the
antenna connected with the DTV antenna terminal.
1 Repeat steps 1 to 4 provided for “Adding New Channels“.
2 Select “Aerial Power“ ( /).
3 Select “On“ or “Off“ ( /).
Note
• You can select "DTV Setup" only when watching DTV channels.
Restoring the system defaults
Use this function only when you wish to reset all the DTV settings to
the factory defaults.
1 Press HOME MENU.
2 Select “Setup“ ( / then ENTER).
3 Select “DTV Setup“ ( / then ENTER).
4 Select “Installation“ ( / then ENTER).
The password entry screen appears. Enter your 4-digit password using
buttons
0 to 9.
5 Select “Restore System Defaults“ ( / then ENTER).
A confirmation screen appears.
6 Select “OK” to restore the system defaults.
Auto Installation is initiated automatically.
Note
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 47.
• You can select "DTV Setup" only when watching DTV channels.
Customizing channel related settings
This section describes how to customize various channel related
settings. These settings include favourite channel registration,
Channel Skip, and Channel Lock.
Setting Channel Options
Use the following procedure to select individual channels and switch
on the Favourite, Channel Skip, or Channel Lock for the channels.
1 Press HOME MENU.
2 Select “Setup“ ( / then ENTER).
3 Select “DTV Setup“ ( / then ENTER).
4 Select “Channel Management“ ( / then ENTER).
The password entry screen appears. Enter your 4-digit password using
buttons
0 to 9.
5 Select “Channel Options“ ( / then ENTER).
The Channel options screen with a list of registered channels appears.
6 Select an individual channel ( /// then ENTER to select
on/off).
• Select "On" for Favourites if you want the channel to be registered
as your favourite (digital) channels. Selecting from the registered
list may be the easiest way to tune to those channels.
Signal Check
Signal Strength
0 25 50 75 100
Signal Quality
Add New Channels
77%
100% Good
:
:
RF Channel 21
Installation
Country
Add New Channels
Aerial Power
Replace Existing Channels
Restore System Defaults
Signal Check
Germany
Off
Channel Options
Channel Skip
001 ∗∗∗ ∗∗∗
002 ∗∗∗ ∗∗∗
007 ∗∗∗ ∗∗∗∗∗
030 ∗∗∗∗ ∗∗∗∗∗∗∗
040 ∗∗∗ ∗∗∗∗ ∗∗
051 ∗∗∗ ∗
800 ∗∗∗ ∗∗∗∗∗∗∗∗∗∗
PDP4270XD_En.book Page 36 Friday, June 16, 2006 5:32 PM