ProMaster RL60 - Manual

Macro Ring Light
RL60 LED
Thank you for purchasing the PROMASTER ® RL60 LED Macro Ring Light.
Please read the following instructions to ensure the best
operation of your light panel.
Installing the Batteries
Remove the battery cover from the back of the light by gently
pressing the battery door and sliding it downwards.
Insert 2 AAA batteries (not included) as shown. Be sure the batteries
are inserted with the correct polarity (+,-) as shown in the battery
compartment. Reinstall the battery cover.
After the batteries are properly installed use the power switch to turn the RL60 on or off.
Attaching to your camera
The RL60 Macro Ring Light attaches to the front of your camera’s lens using PROMASTER ® Macro Ring P mounting rings or Cokin ®
P Series mounting rings. (Mounting rings must be purchased separately.)
Select the Macro Ring P that matches the filter size of the lens that you wish to use.
Rings are available in sizes from 52mm to 77mm.
First mount the Macro Ring P to your lens.
After mounting the Macro Ring P to your lens, slide the RL60 LED
Macro Ring Light over the flange of the ring until it locks in place.
To remove, simply reverse the process.
Macro Ring P