Pioneer VSX-9110TXV-K - Manual (Page 76)

Additional information 12
76
En
iPod messages
XM radio messages
Note
• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug
from the outlet and insert again to return to normal operating conditions.
Symptom Cause Action
Error I1 There is a problem with the signal path from the
iPod to the receiver. Switch off the receiver and reconnect the iPod to the receiver.
If this doesn’t seem to work, try resetting your iPod.
Error I2 The software version being used with the iPod
needs to be updated. Update the software being used with the iPod (software
versions prior to iPod update 2004-10-20 are not supported).
No Track There are no playable songs currently stored in
the iPod. Input some music files compatible with iPod playback.
Symptom Cause Action
Check Antenna The XM antenna is not connected. Check that the XM antenna cable is attached securely.
XM ANT ERR A short-circuit occurring in the antenna or
surrounding antenna cable. Make sure that there is nothing unusual with the antenna or
antenna cable. Switch the power off then back on again.
Updating The radio is being updated with the latest
encryption code. Wait until the encryption code has been updated. Channels
00 and 01 should function normally.
No Signal The XM signal is too weak at the current location. n/a
Loading The receiver is acquiring audio or program
information. Wait until the information has been received.
Off Air The channel currently selected has stopped
broadcasting. Select another channel.
CH– – – You have selected a channel that does not exist,
or that you have not subscribed to. The receiver will automatically switch to channel 001 (or the
last selected channel).
– – – – – – – – There is no artist name/feature, song/program
title, or channel category associated with the
channel at this time. No action needed.
VSX-9110TXV_KU.book.fm 76 ページ ２００６年４月４日 火曜日 午後５時１５分