Perle Systems RIO 5500036-17 - Manual (Page 264)

RIO Remote I/O System User Guide
rio.cf file
Page 264
Chapter 5 RIO command line utilities
DEFPORT
Function Defines the default settings for ports
Example
Field descriptions
DEFPORT::::::::ixany, ixon ,lock,store
Field
Operating
systems
Description
Available under
Solaris and Linux .
Defines an offset added to each system port when defining the
default name for a device using the
riomkdev utility.
Solaris : Default = 1
Linux : Default = 0
ANSI C "printf" style string defining the default name for a device.
Used by
riomkdev when creating device names for ports.
Solaris: The default of "/dev/term/r03%d" will give the name /dev/
term/r006 to system port 5 (0 based).
Linux: The default of “/dev/ttySR%d” will give you the name
/dev/ttySR5 to system port 5.
Solaris only .
Not available under
Linux.
ANSI C "printf" style string defining the default name for a (user read/
write, default = "/dev/xprt/r03%d") transparent print device used by
riomkdev when creating device names for transparent printing ports.
For example, if default prefix = "/dev/xprt/r03%d", then system port 6
will have the name "/dev/xprt/r006".
Defines device type and contains string "tty" or "modem" defining the
type of default device (user read/write, default = "tty") to be created.
Decimal number defining the number of characters (user read/write,
default = 100) per second rate for transparent print data through a
terminal.Valid values are in the range 10 to 1000.
String defining the "transparent print on" escape sequence sent (user
read/write, default = "XPON") to re-direct transparent print data
through a terminal. (A "^" character is used to generate control
characters, for example, "^[" = 0x1B).
String defining the "transparent print off" escape sequence sent (user
read/write, default = "XPOFF") to stop re-direction of transparent print
data through a terminal. (A "^" character is used to generate control
characters, for example, "^[" = 0x1B).