Pioneer DRM-7000 - Manual

P
RODUCT
I
NFORMATION
B
ULLETIN
Bulletin # 260806
DRM-7000 – 3 Readers/1 Recorder Configuration
Page 1 of 1
Pioneer Electronics (USA) Inc., Engineering Support
(800) 421-1613
This document provides a recommended configuration when using three ROM drives (readers) and a single writer
drive (recorder) for the Pioneer DRM-7000 FlexLibrary. Please refer to the manuals shipped with the unit for more
information.
Installation Check List
The following components are required for this configuration:
• (3) DVD-D7563 or DVD-D7362/7361 DVD/CD-ROM internal read drives
• (1) DVD-R7322 or DVD-R7211 Internal DVD-Recordable drive
• (1) DRM-SN711 Single drive rear panel SCSI connector
• (1) DRM-SC721 2-drive internal SCSI cable extension
• (1) DDG1006 SCSI Loop cable (shipped with DRM-7000)
Recommended Drive Arrangement
Pioneer recommends the following drive arrangement however alternative configurations are available if additional
components are required. For best results, use a separate SCSI channel for the recordable drive.
Additional Information
For further assistance with this library system, please refer to the Pioneer website:
www.pioneerelectronics.com .