Panasonic WORKIO C213 - Manual (Page 60)

60
Chapter 2 More Menus Features
5
Select the desired position of the
binding margin.
6
Input the width of the binding margin
with “
S” and “T”, or the keypad, and
then select “OK”.
z The width of the binding margin can be set
in 1 mm increments, from 5 mm to 99 mm.
7
Enter the desired number of copies.
8
Press the Start key.
z
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
Select to set the binding margin on
the left side of the paper.
Select to set the binding margin on
the right side of the paper.
Select to set the binding margin on
the top side of the paper.
Select to set the binding margin on
the bottom side of the paper.