Panasonic AW-CB400L - Manual (Page 20)

5 Secure the connector panel to the bottom panel using the
screws.
Screws ( ! 3)
Attach the
connector
panel.
19 (E)
How to change the position of the connector panel
1 Remove the three screws of the bottom and side panels
to remove the blank panel.
2 Remove the three screws of the rear and side panels to
remove the connector panel.
3 Secure the blank panel to the rear panel using the
screws.
4 Remove the two rubber feet of the blank panel.
Screws ( ! 3)
Remove the
blank panel.
Screws ( ! 3)
Connector panel
Screws ( ! 3)
Attach the blank panel.
The position of the connector panel can be changed from the rear panel to the bottom panel.
(Rear view)
(Rear view)
Rubber feet