Controller 40, Switching the telephone muting, Attenuation 40 – Pioneer DEH-P5500MP User Manual

Page 40: Switching the dimmer setting, Setting the rear output and subwoofer controller, Switching the telephone muting/attenuation, Initial settings

1 Press FUNCTION to select AUX.

Press FUNCTION repeatedly until AUX ap-

pears in the display.

2 Press a or b to turn AUX on or off.

Pressing a or b will turn AUX on or off and

that status will be displayed (e.g.,

AUX :ON).

Switching the dimmer setting

To prevent the display from being too bright at

night, the display is automatically dimmed

when the cars headlights are turned on. You

can switch dimmer on or off.

1 Press FUNCTION to select DIMMR.

Press FUNCTION repeatedly until DIMMR ap-

pears in the display.

2 Press a or b to turn DIMMR on or off.

Pressing a or b will turn DIMMR on or off

and that status will be displayed (e.g.,

DIMMR :ON).

Setting the rear output and

subwoofer controller

This units rear output (rear speaker leads out-

put) can be used for full-range speaker

(R-SP :FUL) or subwoofer (R-SP :S/W) connec-

tion. If you switch the rear output setting to

the R-SP :S/W, you can connect a rear speaker

lead directly to a subwoofer without using an

auxiliary amp.

Initially, the unit is set for rear full-range speak-

er connection (R-SP :FUL). When rear output

are connected to full range speakers (when

R-SP :FUL is selected), you can connect the

RCA subwoofer output to a subwoofer. In this

case, you can select whether to use the sub-

woofer controllers (low pass filter, phase)

built-in P/O :S/W or the auxiliary P/O :FUL.

1 Press FUNCTION to select R-SP.

Press FUNCTION repeatedly until R-SP ap-

pears in the display.

2 Press a or b to switch the rear output

setting.

Pressing a or b will switch between

R-SP :FUL (full-range speaker) and R-SP :S/W

(subwoofer) and that status will be displayed.

# When no subwoofer is connected to the rear
output, select R-SP :FUL.
# When a subwoofer is connected to the rear
output, set for subwoofer R-SP :S/W.
# When the rear output setting is R-SP :S/W,
you cannot change the subwoofer controller.

3 Press c or d to switch the subwoofer

output or non fading output.

Pressing c or d will switch between P/O :S/W

and P/O :FUL and that status will be dis-

played.

Notes

! Even if you change this setting, there is no

output unless you turn the non fading output
(refer to Using non fading output on page 37)
or subwoofer output (refer to Using subwoofer
output on page 36) in the audio menu on.

! If you change the subwoofer controller, sub-

woofer output and non fading output in the
audio menu return to the factory settings.

Switching the telephone

muting/attenuation

Sound from this system is muted or attenu-

ated automatically when a call is made or re-

ceived using a cellular telephone connected to

this unit.

Initial Settings

Section

HHHHHHHHHHHHHH