Panasonic SKS-HT750 - Manual (Page 4)

En-
4
Getting to know Your Speaker Package
A Keyhole slots
These keyhole slots
can be used to wall-
mount the speaker.
B Speaker terminals
These push terminals
are for connecting the
speaker to your AV
Receiver, amp, or
other receiver with the
supplied speaker
cables. The supplied
speaker cables are
color-coded for easy identification. Simply connect
each cable to the same-colored positive speaker ter-
minal.
C Speaker mount/bracket inserts
These threaded inserts can be used to attach the
speaker either horizontally or vertically to a speaker
mount or bracket.
Note:
Use commercially available 1/4" screws to attach
the speaker to a speaker mount or bracket.
The center speaker base is for mounting the center
speaker horizontally. If you put it on a TV stand or AV
stand, aim it toward the listening position. The center
speaker should sit securely on the base. If it’s loose, try
resetting it.
The cradle surface of the base features two stoppers to
prevent the speaker from moving. Therefore, you can tilt
the speaker toward the front by up to 11 degrees.
■ Using the included rubber spacers
We recommend using the
supplied rubber spacers
to achieve the best possi-
ble sound from your
speakers. The rubber
spacers prevent the
speakers from moving,
providing a more stable
setup.
The speakers can easily be wall mounted by using the
keyhole slots. To prevent the speaker from vibrating
against the wall, attach four of the supplied spacers to the
keyhole fins on the rear of each speaker.
■
Mounting vertically
To mount the front speakers vertically, use the keyhole
slot shown to hang each speaker on a screw that’s
securely screwed into the wall.
■
Mounting horizontally
To mount the center speaker horizontally, use the two
keyhole slots shown to hang each speaker on two screws
that are securely screwed into the wall.
Front, Center, Surround, and
Surround back speakers (SKF-750F,
SKC-750C, SKM-750S, SKB-750)
Center Speaker Base
3
2
1
Rear
11
SKC-750C
Base for horizontal
mounting
Stoppers
Wall Mounting
Bottom of
the base
Rubber spacers
Front
Keyhole slot for
vertical wall
mounting
Rubber spacers
Keyhole slots for horizontal
wall mounting
Rubber spacers