Planet Technology 802.11g Wireless ADSL 2/2+ Router ADW-4401A/Bv2 - Manual (Page 31)

31
LABEL DESCRIPTION
Username Enter your username for your PPPoE/PPPoA connection.
Password Enter your password for your PPPoE/PPPoA connection.
Encapsulation Select your encapsulation type from the dropdown list.
Bridge Interface Select whether the Interface will be Activated or Deactivated.
Connection Select whether your connection is always on or if it connects on
demand. If on demand, specify how many minutes the
connection may be idle before it disconnects.
TCP MSS Option Enter the TCP MSS you wish to use here.
Get IP Address Choose whether the ROUTER obtains the IP address statically
or dynamically.
Static IP Address Enter the static IP address here. Only if you chose Static above.
IP Subnet Mask Enter the IP subnet mask here. Only if you chose Static above.
Gateway Enter the gateway here. Only if you chose Static above.
NAT Select whether NAT is Enabled or Disabled.
Default Route Select whether this PVC will be the default route for Internet
data.
TCP MTU Option Enter TCP MTU Value here.
Dynamic Route
Select the RIP type and direction from the dropdown lists.
Multicast Select the multicast protocol you wish to use from the dropdown
list.