24
2. Basic operations
2-7. Preset memory
Up to 10 panel settings can be stored in this memory (flash memory).
The table below lists the settings which are stored.
Item
Description of setting
Initial value (factory default)
Crosspoint
A bus
1
B bus
2
KEY-S
4
KEY-F
5
AUX bus
1
Color background
WHITE
Wipe
Wipe pattern
4 (center)
Border width
4 (TBD)
Soft effect width
4 (TBD)
Border color
YLW
Transition area
BKGD/KEY selection
BKGD
MIX/WIPE selection
MIX
Auto transition time (BKGD)
60F
Auto transition time (KEY)
60F
Key
Key type (TYPE)
LIN
Key adjustment (ADJ)
GAIN: 100 (TBD)
CLIP: 50 (TBD)
DENS: 100 (TBD)
Inversion ON/OFF
OFF
Fill color
GRN (TBD)
Edge color
YLW (TBD)
Edge ON/OFF (TYPE)
OFF
Edge width
4 (TBD)
User color
User color 1 (HUE, SAT, LUM)
0, 0, 100 (TBD)
User color 2 (HUE, SAT, LUM)
355, 100, 7 (TBD)
User color 3 (HUE, SAT, LUM)
50, 100, 29 (TBD)
User color 4 (HUE, SAT, LUM)
0, 0, 0 (TBD)
STORE: This is used to store the panel settings in the preset memory.
Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu.
The PSMEM (1/3) menu appears first.
Turn [F2], select “STOR” using the MODE item, turn [F3], and set the preset memory number using the NO.
item.
Press the [F4] switch (EXEC) to store the settings.
ＰＳＭＥＭ
１／３
ＭＯＤＥ
ＳＴＯＲ
ＮＯ．
＊１０
ＥＸＥＣ
１－１０
ＲＥＣＬ
ＣＬＲ
An asterisk ( ) appears at the left of the number when data has been saved in the preset memory.
