Panasonic CQ-VD6503N - Manual (Page 35)

34
35 CQ-VD6503N
English
MEMORY CLEAR
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡
The ID code is not deleted by executing memory clear.
: no memory clear.
The display returns to the previous one.
: clears the memory to default settings
appears when
is selected.
: no memory clear.
: proceed. OK
CANCEL
YES
REALLY?
YES
NO
OTHER
Other settings
: operation sound (beep) OFF
: operation sound (beep) ON
default: ON
ON
OFF
(Beep setting) BEEP
: set to OFF if your car has no ACC posi-
tion.
: set to ON if your car has ACC position.
default:
Note:
¡
For a ACC-equipped car, select ON. The following
functions are available.
¡ The power is turned on automatically when inserting
a disc or magazine.
¡ selection disables turning on the power of the
main unit through the remote control.
: main unit-specific remote control
: rear monitor (option)-specific remote
control
default:
: LED indicator not blinking with ignition
key being at out-of-ACC
: LED indicator blinking with ignition key
being at out-of-ACC
default: ON
ON
OFF
(Security LED setting) SECURITY LED
FRONT
REAR
FRONT
(Remote control setting) REMOTE CONTROL
OFF
OFF
ON
OFF
(Setting ACC selection ON and
OFF) ACC SELECT
Caution
¡ Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
OFF
ACC
IGN
Caution
¡ Be sure to select OFF when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.
Caution
¡ Record your registered ID code and keep it in a
secure location. (Fill in the ID code memo (
a
page 50).) If you forget it, you will be unable to use
the unit. In case you forget the ID code, please
consult your nearest Panasonic Service Centre.