Plantronics Discovery 925 - Manual (Page 15)

11
en
troubleshooting
My earpiece
does not work
with my phone. Make sure the earpiece is fully charged.
Make sure earpiece is paired with the Bluetooth
phone you are trying to use.
See “Pairing Your Earpiece” on page 4.
My phone did not
locate the earpiece. Turn both your phone and earpiece off and on,
and then repeat the pairing process on page 4.
I could not enter
my PIN code. Turn both your phone and earpiece off and on,
and then repeat the pairing process on page 4.
Your PIN code, or Passkey, is 0000.
I cannot hear
caller/dial tone. The earpiece is not turned on. Press the call
control button for approximately 2 seconds until
you hear a tone or see the indicator glow blue.
Your earpiece is out of range. Move the earpiece
closer to the Bluetooth phone.
Your earpiece battery is drained. Charge your
battery. See “Charging Your Earpiece” on page 1.
The listening volume is too low. Incremental
tapping of the volume button will adjust volume.
See instructions for adjusting the volume in
“Earpiece Controls” on page 8.
Make sure that the eartip fits properly. See
“Adjusting the Fit” on page 6.