Panasonic EB-X800 - Manual (Page 23)

20
Getting Started
Opening/closing the phone
You can open your phone by pressing the One
Push Auto Open button.
Clamshell setting
Opening the phone answers the incoming call
and closing the phone ends the call.
When Active clamshell setting is set to Off (see
page 46), you must answer the incoming call by
[q]. Closing the phone switches the caller’s
voice to the back loudspeaker and mutes your
voice. However, when you are using a headset,
you can continue your conversation even while the phone is closed.
Switching the phone on/off
1. Press and hold [,] for 2 to 3 seconds to switch the phone on
A greeting may be displayed and the phone enters standby mode.
2. Press and hold [,] for 2 to 3 seconds to switch the phone off
OR
[,] 7 [192] to scroll to Switch off! 7 [0]9[5] (OK)
Note: If your SIM card is PIN protected, your PIN code will be requested.
Enter the PIN code and [5] (OK). See “Security settings” on page 50.
One Push Auto
Open button