LST FWZ2-1 - Manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED FWI2-1_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
The Fire Brigade Interface FWI2-1 by means of dry
contacts allows for the connection of two independent
transmitting devices for the direct interconnection with
a designated alarm respondent (e.g., the fi re brigade)
as well as the connection of a country-specifi c fi re bri-
gade control unit to fi re detection control panels Series
BC216.
The parameters of the nine inputs and eight outputs can
also be freely set and thus are available for general con-
trol tasks. Optionally, the Fire Brigade Interface Additio-
nal Board (FWZ2-1) can be attached to the Fire Brigade
Interface. This unit allows for the connection of two
independent, line-monitored transmitting devices. The
surveillance current can be adjusted in three levels.
• 2 independent relay outputs
• 9 inputs and 8 outputs for control
tasks
• Connection of country-specifi c fi re
brigade control units
• Line monitoring by means of auxiliary
module