Getting started, Product registration, Installation considerations – Lexicon Power Amplifer GX-7 User Manual
Page 9

GX-7
Getting Started
1-3
HIGHLIGHTS
•
125 Watts/8 ohms per channel
•
Massive toroidal power transformer with two windings for each
channel
•
High-power supply voltage for extra headroom at the outputs
•
Stable with mismatched, reactive, or unusual loads
•
Compatible with 4 ohm speaker impedances
•
Heat-sink mounted to each channel for cooling
•
Speaker protection against DC and frequencies below 10Hz
•
Protection against short circuits, device failures, miswiring, and
internal faults
•
Trigger input for power control from an external device
•
RCA inputs
•
Gold plated input and output connectors
•
Rack-mount option available
PRODUCT REGISTRATION
Please register your new amplifier within 15 days of purchase.
Register online at www.lexicon.com or complete and return the
product registration card attached to the back cover of this user
guide. Retain the sales receipt as proof of warranty coverage.
INSTALLATION CONSIDERATIONS
To ensure optimal performance, pay particular attention to
instructions below and to other precautions that appear
throughout this user guide.
D
O
be careful when moving the amplifier, as it is quite heavy.
D
O
install the GX-7 on a solid, flat, level surface such as a table or
shelf. The GX-7 can also be installed in a standard 19-inch
equipment rack using an optional rack-mount kit available from an
authorized Lexicon dealer.
D
O
N
OT
install the GX-7 on a surface that is unstable or unable to
support all four feet.
D
O
select a dry, well-ventilated location out of direct sunlight.
D
O
N
OT
expose the GX-7 to high temperatures, humidity, steam,
smoke, dampness or excessive dust. Avoid installing the GX-7 near
radiators and other heat-producing appliances.
D
O
N
OT
install the GX-7 near unshielded TV or FM antennas, cable
TV decoders, or other RF-emitting devices that might cause
interference.
D
O
N
OT
place the GX-7 on a thick rug or carpet, or cover the
ventilation holes in the chassis, as this might prevent proper cooling.
D
O
N
OT
place the GX-7 on a windowsill or any location exposed
to direct sunlight.
D
O
N
OT
stack the GX-7 directly above heat-producing equipment
such as another power amplifier.