beautypg.com

Perating sequence, Caution, Warning – LG LDF 7811ST User Manual

Page 16

background image

O

PERATING SEQUENCE

16

1. Open the door and press the

power button.

Open the door. Press the power button to see
the default setting.

2. Check rinse-aid.

The indicator lights will illuminate if refilling is
necessary.

3. Load the dishes after first

removing any scraps of food.

Remove any scraps of food in advance. Pull
the lower rack out and load the dishes and
cutlery in and push it all the way back. Pull
the upper rack out and load the cups,
glasses, etc.

4. Ensure that the spray arms can

rotate freely.

5. Measure the detergent.

Add the required amount of detergent into the
dispenser. Close the detergent dispenser lid.

6. Setting the program.

Select desired program and options.
Before starting, the display window will show
the estimated running time of the selected
program. If the number of dishes only fill one
rack, you can use the Half Load option. For
example, if you load dishes only on the upper
rack, you adjust the Half Load button to the
upper rack.

Remember to load all dishes into the
selected rack.

The estimated remaining time will be
displayed.
If the door is opened during operation, the
dishwasher stops.
Once the door is closed, the program will
restart from the point where it's stopped.

7. Close the door. The dishwasher

will start automatically.

8. At the end of the Program.

End is displayed on the digital display for a
few seconds and a tone will sound signaling
the program completion. The dishwasher
automatically switches off for safety and
energy savings.

Caution

Empty the lower rack first and then the upper
one, this will avoid water dripping from the
upper rack onto the dishes in the lower one.

Warning

In general,it is not advisable to open the door
while the dishwasher is running. If the door is
opened, a safety device stops the machine.
Care should be taken when opening the door
immediately following the cycle, as steam may
escape.

OPERA

TING

SEQUENCE

Auto-Off

When the power is turned on, if you don’t
select program or if you don’t close the door
after selecting a program, your dishwasher will
automatically turn off in 10 minutes.

3828DD3002P

2005.1.20

12:55

PM

페이지16

001

HP

LaserJet

5000

Series

This manual is related to the following products: