Feature finder, Feature finder –5 – Lucent Technologies MDW 9000/9010 User Manual
Page 6
4
Feature Finder
This table shows where to look for information about performing specific telephone activities. Any
features that do not have detailed instructions can be used by following the directions in Using
Features (p. 10) or programmed by following the instructions in Programming Buttons &
Settings (p. 22).
Calling
If you want to ...
Then
Dial numbers with the touch of a button.
Program codes for numbers you dial often.
See Personal Speed Dial, p. 17.
Quickly dial numbers your company has programmed.
Make a voice-announced call to 1 or more co-workers.
Use an ICOM Voice or SA Voice button (Line
Button Types, p. 2) and see also Paging, p. 16.
Broadcast over the company’s loudspeaker system.
Make and answer calls with no hands.
For information about a headset, see p. 6.
Automatically redial a number you dialed before.
See Last Number Dial, p. 16, and Saved
Number Dial, p. 19.
Connect to an extension or outside line when it’s
free (phones with SA buttons only).
Enter an account code before or during a call.
Know if someone is calling you when all your other
lines are in use.
Disconnect the call you’re on without hanging up.
Set up a conference with as many as 4 others.
Transfer a call.
See Transfer, p. 7, and Park & Pickup, p. 17.
Reach a voice mailbox without calling the person.
Make a call from another extension, using your own
See Authorization Codes, p. 11.
calling privileges.
Put a call on hold.
Customizing Your Phone
Program a feature on an unused line button.
See Programming Buttons & Settings, p. 22.
Adjust volume of the earpiece or ringer.
Give your phone its own distinctive ring
(MDW 9000/9010 only).
Delay or remove the ring from an outside, SA, or
See Rings, p. 2, and Coverage, p. 14.
ICOM line button.