Lucent Technologies MDW 9000/9010 - Manual (Page 12)

10
There are two ways to activate a feature:
• Directly, as explained below
• By pressing a line button you programmed with the feature (see Programming Buttons &
Settings, p. 22)
Using Features
␣Feature Button␣
You do not need to program a Feature button unless you enter account codes (p. 11) during calls.
See Using a Feature Button, p. 3.
To program a line button to be used as your Feature button:
1. Label a button as Feature.
2. Turn the phone on and press the imprinted Feat button; then dial 00.
3. Press the button you labeled.
4. Dial ✻20.
5. Press the imprinted Feat button; then dial 00.
To use a feature you have not programmed on a button:
1. Press # or the programmed Feature button.
2. Dial the feature code (see the Feature Codes list below).
Feature Codes
Account Code 82 + code + #
Authorization Code 80 + code + #
Callback 55
Callback Cancel ✻ 55
Call Waiting
pick up call waiting call ■ 87
Camp-On 57
Direct Voice Mail 56 + extension
Follow Me 34 + extension
Forward
inside 33 + extension
outside 33 + dial-out code
+ number +
#
Forward and Follow Me
cancel from all
extensions ■ ✻ 34 ✻
cancel from one
extension ■ ✻ 34 + extension
cancel from your phone 33 + your extension
Last Number Dial 84
Messaging
cancel message ■ ✻ 53 + extension
leave message 25
leave message without
calling ■ 53 + extension
turn off Message light
manually 54
Paging loudspeaker 9 + line number
+ zone
Personal Speed Dial ■ code (01–24)
Pickup
group 88
inside 9 + extension
outside 9 + line number
Privacy
off ✻ 31
on 31
Reminders
set reminder 81 + time + 2 or 7
cancel reminder ✻ 81
System Speed Dial code (600–729)
■ Available only by using feature code.