La Crosse Technology WT-2191A - Manual (Page 12)

10
the “ALM1” or “ALM2” key once,
depending on which alarm needs to be
activated.
C. When the alarm is sounding, pressing
the “SNOOZE” will turn it off for the time
that was selected in the programming
mode (section II.A.2.c.). The snooze is
activated by pressing back on the entire
unit while the cover is open. The actual
button is on the bottom of the unit and is
pressed by the cover when pushed back. If
the setting is “0”, the alarm will turn off
for 24 hours. During the snooze period, the
lower screen will show a countdown until
the alarm will sound again. If the snooze
bar is pressed again during the original
snooze period, the period will be reset.
Once the period is finished, the alarm will
sound again. Pressing any key other than
the snooze key will turn off the alarm for
24 hours.