Operation, Child lock, Vent fan – LG LMV1650SW User Manual
Page 11: Light hi/low/off, Light timer
CHILD LOCK
You may lock the control panel to prevent the
microwave from being accidentally started or used by
children.
The Child Lock feature is also useful when cleaning the
control panel. Child Lock prevents accidental
programming when wiping the control panel.
VENT FAN
The fan moves steam and other vapors from the
cooking surface. There are five speeds.
NOTE:
• If the temperature from the range or cooktop below
the oven gets too hot, the exhaust fan in the vent
hood will automatically turn on to protect the oven.
• It may stay on up to an hour to cool the oven. When
this occurs, the ON/OFF button will not turn the fan off.
LIGHT HI/LOW/OFF
Touch HI/LOW/OFF pad
once
for bright light, twice fo
r
night
light, or three times to turn
the
light off.
LIGHT TIMER
You can set the LIGHT to turn on and off automatically
at any time you want. The light comes on at the same
time every day until reset.
NOTE: To reset the time to turn on and off the LIGHT,
repeat steps 1 to 5.
NOTE: If you want to cancel the LIGHT TIMER in
operation, you should touch
HI/LOW/OFF
pad.
- 11 -
Example: To set the child lock.
1. Touch STOP/CLEAR pad.
2. Touch and hold STOP/CLEAR
pad more than 4 seconds.
LOCKED will appear in the
display window with two beeps.
Example: Turn on 2:00 AM, turn off 7:00 AM.
(Press once for AM,
Touch TIMER pad.
1.
twice for PM.)
2. Enter the time you want
the LIGHT to turn on.
3. Touch TIMER pad again.
(Press once for AM, twice
for PM.)
4. Enter the time you want the
LIGHT to turn off.
5. Touch START pad.
Example: To cancel the child lock.
1. Touch and hold STOP/CLEAR
pad more than 4 seconds.
LOCKED will disappear and
you hear two beeps. At this
time the oven is ready.
Example for Level 4
1. Touch ON/OFF pad.
This shows the last level
until you select the fan
speed level.
2. Touch 5
-
SPEED pad
until LEVEL4
appears in
the display.
Touch ON/OFF pad to turn off fan when desired.
Example: To cancel the LIGHT TIMER.
1. Touch TIMER pad.
2. Touch STOP/CLEAR pad.
STOP
CLEAR
STOP
CLEAR
STOP
CLEAR
START
OPERATION