Kenwood DNX7360BTM User Manual
Page 63
DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM English
63
Next page
3
Next page
3
4
Set the Graphic Equalizer
DDX8 series
1
1
1
DNX7/ DDX7 series
1
1
1
1 Gain level can be adjusted by
touching the each frequency bar.
[
2], [3] Sets a frequency.
[
5], [∞] Sets a gain level.
[EQ Init] Returns to the previous level
which the gain level is adjusted.
[Flat] Tone curve becomes flat.
[Bass EXT] Bass Extend settings.
When turned on, the frequency lower
than 62.5 Hz is set to the same gain
level as 62.5Hz.
[SW Level] Adjusts the subwoofer
volume.
The setting is available when subwoofer
is set to any item other than "None". See
Zone Control
Zone Control
You can set the front and rear audio
source.
1
Display the Zone Control screen
Touch [
]
>
>
[
]
>
>
[Zone
Control]. (page 61)
2
Set the Zone Control
[Single Zone] Sets the unit to single
zone.
[Dual Zone] Sets the unit to dual zone.
[Front Source] Sets the front audio
source.
[Rear Source] Sets the rear audio
source.
⁄
• When the rear speaker sound is switched,
the audio source that is output at the AV
OUTPUT terminal is also switched to the
same source.
[Rear VOL.] Adjusts the volume of the
rear channel.