Konica Minolta IC-204 - Manual (Page 76)

Setting Up Network Printing 3
IC-204 3-11
– Setting the Raw Printing
8
Put a check to [Raw], enter the port No. having set to the [Raw Settings]
box and click [OK].
– Check the port No. setting in the [RAW Port Number] if required.
Refer to the “User’s Guide [Network/Scanner]” for more information
on the [RAW Port Number].
9
Click [Next] and [Finish] to complete this step.
– Setting the LPR Printing
10
Select “LPR”, enter “Print” in the “Queue Name” box, and then click the
[OK].
11
Click the [Next], and then click the [Finish] to apply the setting.