Kawasaki ZX-7 78410 - Manual (Page 18)

18
Assembly
• Fit and hold an inner shock half
to the inside of the exposed
handlebar.
• Fit and hold an outer shock
half to the outside of the same
handlebar.
• Make sure the top ends of the
shock halves fit into the fender.
16
• Position the front wheel between
the handlebars.
• Slide the front axle through the
front wheel.
17
18
• Fit and hold the hubcaps to
each side of the front wheel.
• Make sure the posts on the inside
of the hubcaps fit into the inden-
tations on the front wheel, so that
the hubcaps lay flat against the
wheel.
Hubcap
Front Wheel
Front Wheel
Front Axle
Front Wheel
Fender
Outer Shock Half
Inner
Shock
Half