Kreisen LT-30FMP - Manual (Page 12)

12
Turning the TV On and Off
Standby Setup: The AC-DC converter and the AC power
cord must be set up and connected to have the TV in
standby mode ready to be turned on. Press the power
button on the front panel of the TV to go into standby
mode.
1. If the TV is in standby mode, press the Power
button on the remote controller or the TV itself to
turn the TV on.
2. Press the Power button again on the remote
controller or the TV itself to turn the TV off.
Note : If the TV is on and the power button is pressed to
turn the TV off, the TV goes into standby mode.
Channel selection
You can select a Channel number with the CH x xy y button
or NUMBER buttons.
Volume adjustment
Press the VOLÏ Ïq q button to adjust the sound level.
Quick view
Press the Q.VIEW button to view the last channel you
were watching.
Sound mute function
Press the MUTE button. The sound is switched off and
the mute display
appears.
To cancel mute mode, press the MUTE button again,
VOLÏ
Ïq q, SSM button or SAP button.
On screen menu language selection
The menu can be displayed on the screen in desired
language.
First select your language.
1. Press the MENU button.
2. Select the Setup menu.
3. Select the Language.
4. Press the CHx
xy y button to select your desired
language.
5. Press the TV/AV button.
All the on screen menu will appear in the selected
language.
Basic Operation
CH
CH
VOL VOL
PSM
TV/AV
Language
English
Français
Español
▲▼ MENU TV/AV