Konexx MOBILE KONNECTOR - Manual (Page 4)

If you set the Level switch too high, you will hear feedback such as a buzz or loud squeal through the modem speaker when
your modem is off-hook. If you hear feedback, set the Level switch to the next lower setting - using the sequence 2, 3, 1, 4 -
until the feedback disappears.
For example, if the Level switch is set to 2 and you hear feedback, set it to 3. If you still hear feedback, set it to 1. If feedback
continues, set it to 4.
Switch settings
The Mobile Konnector enables your modem to communicate through your phone system with specific level settings. The
settings are adjustable to four different levels depending on the model of phone you are connecting to.
Table 3-1 shows the Level switch settings to use for various telephone models. If the telephone you want to use does not
appear in Table 3-1, set the level as described in the previous section. If feedback occurs for all four levels, contact Technical
Support and they will assist you in determining the correct setting for your compatible phone.
A “Yes” in the “Auto-dial” column indicates that autodialing is supported with that telephone model. The number in the “SEE
NOTE” column refers to a note at the end of the table.
Table 3-1. Telephone Level
Switch Settings
MANUFACTURER MODEL SWITCH
SETTING
AUTO-
DIAL
SEE
NOTE
Ameritech
None
Specified
1 Yes 1
AT&T Definity
Destiny
Dimension
G2
Horizon
ISDN
Infinity
Legend
3
3
2 or 3
4
2
3
3
3
Yes
---
---
Yes
Yes
No
Yes
No
2
2
1
AT&T
(continued)
Merlin
Merlin II
Partner
Spirit
System 25
System 75
System 85
3
3
3
3
3
3
3
Yes
---
Yes
Yes
Yes
Yes
Yes
2
1
3 & 4
3 & 4
3 & 4
Comdial Digitech
Executech
Impact
3
3
3
Yes
Yes
Yes