Kohler Escale K-11343-G - Manual (Page 2)

Optional Accessories (continued from Page 1)
K-9498
3 ″ (76 mm) whirlpool keypad trim ❑ CP ❑ Other_____
Technical Information
Fixture*:
Bathing well:
Basin area
46-3/4
″ (1187 mm) x 21-5/8″ (549 mm)
Top area 69-15/16 ″ (1776 mm) x 34-3/8″ (873 mm)
Weight 130 lbs (59 kg)
To overflow:
Water depth
16-1/2 ″ (421 mm)
Capacity 71 gal (268.8 L)
* Approximate measurements for comparison only.
Blower
motor/control: W V Hz A
300 220-240 50/60 3
Included component:
Cut-out template
1054544-7
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/control
220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
42 lbs/square foot (206 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
This bath is designed for drop-in installation only. It is not
suited for use in a three wall alcove with an overhead shower.
A blower motor/control access panel is required.
35-5/8"
(905 mm)
71-5/8" (1819 mm)
1-1/2" OD
2-7/8" (73 mm)
3" (76 mm)
3-1/2" (89 mm)
No change in measurements if connected
with drain illustrated. (K-7214)
Blower/Control Access
30" (762 mm) W x
15" (381 mm) H
1-7/8"
(48 mm)
22-1/4"
(565 mm)
Product Diagram
ESCALE
®
ESCALE
®
BUBBLEMASSAGE
TM
BATH
Page 2 of 2
1054545-4-
E