Kompernass KH 6598 User Manual

Page 3

ECHNICAL DATA

Voltage:

230V AC

Power:

220OW

Volume:

1.7 L

EFORE FIRST USE

01. Remove all packaging material!
02. Clean the kettle by filling with cIean water and bringing to the boil

(see “operation”). Pour away the water then repeat the operation.

PERATION

01. Wind out the mains cord only as much as necessary. Draw it out through the

opening in the base and connect it to a suitable mains socket.

02. Open the lid and pour water of the desired quantity in. While doing so, watch the

water level mark. Never go below the minimum (0.5L) or above the maximum
(MAX) marks.

03. Close the lid and ensure that thee kettle is switched off before setting it

on the base.

04. Switch on, the appliance will begin to operate, and the indicator Iight will come on.
05. When the water boils, the appliance will switch off automatically and the

indicator light will go off.

06. If you wish to stop the boiling process or interrupt it temporarily, switch the

appliance off by pushing the switch upwards, before removing the kettIe
from its base.

Note: This appliance with a safety device which automatically switches off the heater
element if the appliance is inadvertently switched on when empty, or if it boils dry.
In this case, let the appliance cool down completely, before filling water again.

LEANING AND CARE

PIease also observe the safety advice for this.
01. Always remove the plug from the mains socket before cleaning the base. Let the

kettle cool down completely.

02. Clean the outside of the kettle and the base with a soft dry cloth. Do not use

scouring materials.

03. Descale at regular intervals. Use a descaling agent, which can be obtained from

specialist shops given.