Kohler Rapport K-1496-H2 - Manual (Page 2)

Optional Accessories
K-1703
Remote control ❑ NA
Technical Information
Fixture*:
Bathing well:
Basin area
45
″ (114.3 cm) x 26″ (66 cm)
Top area 67 ″ (170.2 cm) x 31″ (78.7 cm)
Weight 123 lbs (55.8 kg)
To overflow:
Water depth
18 ″ (45.7 cm)
Capacity 110 gal (416.4 L)
* Approximate measurements for comparison only.
Drop-in
cutout 70-3/4 ″ (179.7 cm) x 34-5/8″ (87.9 cm)
Pump: kW V Hz A
Variable-
speed: 1.5 240 50/60 11
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control
220/240 V, 20 A, 50/60 Hz
Locate the outlets behind the whirlpool and within 24”
(61 cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
60 lbs/square foot (290 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H
35-3/4" (90.8 cm)
3-1/2"
(8.9 cm)
3" (7.6 cm)
2-7/8" (7.3 cm)
1-1/2" OD
1/4" (6 mm)
24-1/2"
(62.2 cm)
3/4" (1.9 cm)
72-3/8" (183.8 cm)
36" (91.4 cm)
2" (5.1 cm) 8-1/2" (21.6 cm)
Product Diagram
RAPPORT
®
RAPPORT
®
6’ BATH WHIRLPOOL
Page 2 of 2
1022397-4-
C