Sony SPK-HCD - Manual (Page 24)

24
A
1 2 3 4 5 1
PROGRAM
EDIT
MIN SEC
2 3 4 5
6 7 10
B
A
1 2 3 4 5 1
PROGRAM
EDIT
MIN SEC
2 3 4 5
6 7 8 9 10
11 12 13 14 15
16
A
1 2 3 4 5 1
PROGRAM
EDIT 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16
3
Designate the length of your tape.
After 2 seconds the time for one side is displayed
• To set the minute
C-74 (37.00 min.) — C-60 (30.00 min.) — C-54 (27.00 min.)
C-90 (45.00 min.) ———— – – – – ———— C-46 (23.00 min.)
..
..
.
Press ± Press ≠
Each time ≠/± is pressed, the time changes as
follows:
( 9
≠ ±
. After 2 seconds
5
Press EDIT once more, to make a program
for the other side of your tape.
EDIT
4
Press EDIT.
The program for side A is completed.
Time
Total playing
time
Chosen
tracks
To play the program
Press ·.
The selections for side A will be played and then the unit
will pause. "B" lights up in the tape side indicator. Set the
tape to the beginning of side B, then press · or P.
The tracks for side B will be played.
Note
Playback can be performed when "EDIT" is displayed.
To stop playback
Press p.
You can play the same program repeatedly as long as you do
not cancel time edit or erase the program.
To cancel time edit
Press CONTINUE and return to the continuous playing
mode.
The program will be erased.
To erase the entire program
Press p once during stop; twice during playback.
The program is also erased when you turn off the unit or
open the disc table.
To include desired tracks in the program
1 Make your own program of desired tracks.
(See page 22 for instructions.)
2 Just designate the length of your tape, as shown on the
preceding page. The unit will place your selections at the
beginning of its program and add other tracks to fill in any
remaining time.
Designating the Total Playing Time – Time Edit