Sony UP-50 - Manual (Page 103)

103 Installation and Adjustment
40&40 50&40 60&40
40&50 50&50 60&50
40&60 50&60 60&60
COLOR BALANCE
B A L X : 50 [1 – 50 – 99]
B A L Y : 50 [1 – 50 – 99]
B A L STEP : 10 [1 – 20]
TEST PRINT : PRESS [EXEC]
PRN SETUP : PRESS [ > ]
Q1 A 1 S
COLOR : 200
To perform rough adjustment
To perform color balance adjustment beyond the current color balance range,
increase the value of the BAL STEP.
2
Make a test print by repeating steps 5, 6, 7 and 8 in “Adjusting the Color
Balance” on page 98.
3
Select the image with the best color balance among the 9 images, if you can
decide. Then display the values of BAL X and BAL Y by using the
F, f, G or
g button.
Repeat steps 1 and 2 until you have obtained the best color balance.
4
Go back to step 10 in “Adjusting the Color Balance” on page 102.
If you change BAL STEP from 05 to 10, the color
balances of the test print are changed as
illustrated.