Sprint Nextel 595U - Manual (Page 118)

110 Section 4A: Installing and Using the Software on a Mac Computer
Connecting to the Sprint Network
To connect to the Sprint network:
ᮣ
In Watcher Lite, click Connect.
Once you're connected to the network, Watcher Lite shows the amount of time
you've been connected, and the amount of data received (Rx) and transmitted
(Tx).
To end your network connection:
ᮣ In Watcher Lite, click Disconnect.
Icons and Text in Watcher Lite
Depending on the USB modem and connection state, Watcher Lite may display
some of the following icons and text:
Icon/text Description
CDMA network signal strength, indicated by the number of bars.
You are not in coverage.
You are in 1X and 1xEV-DO Rev. 0 coverage.
You are in 1X and 1xEV-DO Rev. A coverage.
You are in 1X coverage.
You are in 1xEV-DO Rev. 0 coverage.
You are in 1xEV-DO Rev. A coverage.
You are roaming. Roaming charges may apply.
You are in the network coverage area (not roaming).