Sharp UP-600 - Manual (Page 106)

106
PLU/UPC stock
You can assign a stock quantity to each PLU/UPC code.
Shown below is an example of selecting “1 OVER WRITE.”
After selecting “1 OVER WRITE,” select a pertinent PLU/UPC
code. Then the next screen will appear to show the following
items:
• CURRENT
The current stock is displayed.
• NEW STOCK (Use the numeric entry)
Enter a new stock quantity (max. 7 digits: 1 to 9999.999)
NOTE
• If you need to add or subtract a stock quantity to or from the
current stock quantity, select “2 ADD” or “3 SUB” and enter a
value to be added or subtracted.
• You cannot enter any values for the item marked with “ ! ”
• The entry of a new stock value will update to the PLU/UPC
stock counter.
Select the desired PLU code from
the PLUs list, or directly enter a
PLU/UPC code.