Samsung SPINPOINT MP2 HM081HJ User Manual
Spinpoint mp2, Mobile sata, Features
![background image](/manuals/155370/1/background.png)
Mobile SATA
Spinpoint MP2
250GB
200GB
160GB
120GB
100GB
80GB
Non-FFS
HM250JJ
HM200JJ
HM160JJ
HM120HJ
HM100HJ
HM080HJ
FFS
HM251JJ
HM201JJ
HM161JJ
HM121HJ
HM101HJ
HM081HJ
FEATURES
• Max. 125GB formatted capacity per disk
• ATA Security Mode Feature Set
• SATA Native Command Queuing Feature
• ATA S.M.A.R.T. Feature Set
• TuMR/PMR head with FOD technology
• SilentSeek™
• Serial ATA 3.0Gbps Interface Support
• NoiseGuard™
• Load/Unload Head Technology
• Free Fall Sensor(optional)
Capacity
1
80GB/100GB/120GB/160GB/200GB/250GB
Temperature
Interface
SATA 3.0Gbps
Operating
5 ~ 55 ℃
Buffer DRAM Size
2
16 MB
Non-operating
-40 ~ 70 ℃
Byte per Sector
512
Humidity (non-condensing)
Rotational Speed
7,200 RPM
Operating
5 ~ 90 %
Non-operating
5 ~ 95 %
Linear Shock (1/2 sine pulse)
Average Seek time (typical)
11ms
Operating(2ms)
325 G
Average Latency
4.17 ms
Non-operating(1ms)
900 G
Data Transfer Rate
Vibration
Media to/from Buffer (Max.)
1.1 Gbits/s
Operating(Random,10~500Hz)
0.7Grms
Buffer to/from Host (Max.)
300MB/s
Altitude (relative to sea level)
Drive Ready Time (typical)
3
4 sec
Operating
-300 to 3000 m
Non-operating
-400 to 15000 m
Non-recoverable Read Error
1 sector in 10
14
bits
Controlled Ramp Load/Unload
600,000
Height (Max.)
9.5 mm
Width
69.85 mm
Idle
80,100,120GB : 2.4Bel
Length
100 mm
160,200,250GB : 2.6Bel
Weight (avg.)
115 g
Performance Seek
80,100,120GB : 2.6Bel
160,200,250GB : 2.8Bel
* Note : Design and specifications are subject to change without prior notice.
1.1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes
Accessible capacity may vary as some OS uses binary numbering system
Voltage
+5V±5%
for reported capacity
Spin-up Current (Max.)
1000 mA
2. A small portion of the 16MB buffer memory is reserved for firmware use.
Seek (avg.)
4
2.65 W
3. Power-On to Drive Ready
Read/Write (avg.)
2.55 W
4. 30% duty cycle, random seek
Low Power Idle (avg.)
0.8 W
※. Unless otherwise specified, specifications are for 250GB configuration
Standby (avg.l)
0.25 W
Sleep (avg.)
0.20 W
2.5" HDD product specification Rev 0.2
Match with product Manual Rev 01
ENVIRONMENTAL SPECIFICATIONS
PERFORMANCE SPECIFICATIONS
RELIABILITY SPECIFICATIONS
PHYSICAL DIMENSION
POWER REQUIREMENTS
ACOUSTICS
Capacity
DRIVE CONFIGURATION
Model