Shure P4M - Manual (Page 5)

ENGLISH
6
This is the basic configuration of the P4M Mixer, and is recommended for small ensembles in rehearsal or performance situations:
1. Connect up to four microphones, instruments or audio devices to inputs 1–4 on the front panel of the P4M.
2. Mix the four signals using the LEVEL/PAN knobs adjacent to the inputs.
3. Connect the MIX 1/L OUTPUT and MIX 2/R OUTPUT on the back panel of the P4M to an appropriate piece of audio equipment.
APPLICATION TWO: Multiple P4M Personal Monitor Mixers to One Audio Device
LEVEL/PAN
KNOBS 1–4
MIX
OUTPUTS
MIX
OUTPUTS
To Next P4M Mixer, or a PSM Transmitter,
PSM Hardwired Bodypack or Amplifier.
P4M
INPUTS 1–4
P4M
INPUTS 1–4
AUX
INPUTS
Personal Monitor Mixer Personal Monitor Mixer
This application, using the P4M’s AUX Inputs, allows more than four inputs to be mixed, and is recommended for larger ensembles in live or rehearsal situations:
1. Connect up to four audio sources into the front panel inputs of a P4M.
2. Mix these signals using the corresponding LEVEL/PAN knobs on the P4M.
3. Connect the MIX OUT outputs of the first P4M to the AUX IN inputs of a second P4M.
4. Connect up to four more audio sources into the front panel inputs of the second P4M Mixer.
5. Mix these signals using the corresponding LEVEL/PAN knobs on the second P4M.
6. Connect the MIX OUT outputs of the second P4M to an appropriate piece of audio equipment.
NOTE: If more than eight inputs are required, connect additional P4M Mixers after the second P4M, using the connection described in step 3
above.
APPLICATION THREE: Multiple P4M Personal Monitor Mixers to Multiple Audio Devices
P4M
Personal Monitor Mixer
Level/Pan
Knobs 1–4
Mix
Outputs
P4M
Inputs 1–4
Mixing
Console
To Mixing Console
To Mixing Console
Monitor Mix
Monitor Mix
Shared Mic/Line Signal
Split
Outputs 1-4
To Next P4M or Amplifier
To Transmitter,
Bodypack or Amplifier
To Transmitter,
Bodypack or Amplifier
Other Audio
Sources
Personal Monitor Mixer
This configuration, using the P4M’s SPLIT OUTPUTS, allows each player to hear a custom mix created at their own P4M Personal Monitor Mixer, and is recom-
mended for live, studio or rehearsal situations:
1. Connect a monitor mix (from a mixing console) and up to three microphones or instruments to the four inputs on the P4M
Mixer front panel.
2. Connect the P4M SPLIT OUTPUTS containing the monitor mix to an input on a second P4M.
3. Connect the other SPLIT OUTPUTS from the first P4M to either the second P4M or to the mixing console.
4. On the second P4M, connect the SPLIT OUTPUT containing the monitor mix to a third P4M or to a floor monitor amplifier.
The other SPLIT OUTPUTS may be connected to a third P4M or to the mixing console.
5. Connect MIX OUT 1/L and MIX OUT 2/R on the back panel of each P4M to an audio device such as a P4T Transmitter, PSM
Hardwired Bodypack or a floor monitor amplifier.
6. On each P4M, mix the four signals using the LEVEL/PAN knobs on the front panel.