Sharp PG-A10X User Manual

Page 53

background image

Easy to Use Functions

-49

If you want to change the keycode, follow
the procedure below.

Note

• When “Anti-Theft” is selected, the password in-

put box will appear. After the password has been
entered, you can change the keycode.

1

Press the buttons on the remote
control or the projector to enter the
preset 4-digit keycode in “Old
Code”.

2

Press any button you like on the re-
mote control or the projector to en-
ter the new keycode.

3

Enter the same 4-digit keycode in
“Reconfirm”.

Note

• If you do not want to set a keycode, leave the

keycode field blank in steps 2 and 3 and press

.

See also other documents in the category Sharp Projectors: