Sennheiser SK 500 G3 User Manual
Page 26
25
Adjusting settings via the operating menu
̈
Set the desired frequency bank.
̈
Set the desired channel.
̈
Set the desired frequency.
Setting the mode for the MUTE switch – “Mute Mode”
For information on how to use the
MUTE
switch, refer to
Adjusting the transmission power – “RF Power”
Via the “
RF Power
” menu item, you can adjust the transmis-
sion power in two steps.
̈
Press the
SET
button.
The frequency selection appears.
̈
Press the
SET
button.
The frequency selection appears.
̈
Press the
SET
button.
Your settings are stored.
You are back to the operating menu.
Mode
Function
“
AF
On/Off
”
When the switch is in the
MUTE
posi-
tion, no audio signal is transmitted.
“
RF On/Off
”
When the switch is in the
MUTE
posi-
tion, the RF signal is deactivated.
“
Disabled
”
The muting function is deactivated.
It is vital to observe the notes on the supplied
frequency information sheet.
Set the frequency
bank and the channel
Set the frequency;
store the setting
Call up “Tune”
(special function)
Advanced Menu
Tune
“Stored”
542.625 MHz
SET
SET
SET
542.625 MHz
Tune
B.Ch:
U1
. 1
542
.625 MHz
B.Ch: U1. 1
Tune
Call up “Mute
Mode”
Select the desired
setting
Store the setting
Advanced Menu
Mute Mode
Mute Mode
Mute Mode
RF On/Off
AF On/Off
AF On/Off
“Stored”
SET
SET
Call up
“RF Power”
Select the desired
setting
Store the setting
Advanced Menu
RF Power
Standard
Standard
RF Power
Low
RF Power
“Stored”
SET
SET