Sanyo ICR-B35 - Manual (Page 18)

-17-
ERASING
Important Note:
Before erasing, make sure that the battery indi-
cator is full.
Preparations
1.
Press the MENU button to select “FOLDE”.
2. Press the TIME/SET button. The folder name
blinks.
3. Press the c or d button to select the folder
to be erased, then press the TIME/SET but-
ton.
4. Press the n button to return to the original
display.
Erasing one file in memory
1.
Press the c or d button to select the file
number to be erased.
2. Press the ERASE button
once. The file number and
“ERASE” blink.
3. While the display is blinking, press the TIME/
SET button. “ERASE” appears briefly.
The file memory in the selected folder is
erased. All the file numbers after the file that
was erased are reduced by one.
To secure the unit
In case the unit is used by unauthorised persons,
you can set the security mode.
To switch security mode on/off during power off,
press the TIME/SET and MENU buttons simulta-
neously. The buttons must be pressed for 4 sec-
onds long. The display shows “SECUR ON”/
“SECUR OFF”.